Decor

Cool use of wax paper is not intended

Pin
Send
Share
Send
Send


Wood panels with a pattern can be a great solution for any interior. In this case, you can make them yourself by selecting your favorite picture. There is nothing difficult in this process.

What is required

  • any piece of wood with a smooth surface;
  • sandpaper;
  • wax paper;
  • jet printer;
  • fasteners;
  • furniture wax.

How to make

Cut the tree if you do not have a finished version and sand it with sandpaper.

Bend and glue one end of wax paper onto a sheet of plain paper. This end should enter the printer first. The other part of the paper is not fixed. Print the picture on wax paper. Do not touch the printed picture.

If there are letters in the selected picture, do not forget to pre-reflect the picture, as it is imprinted on the tree in a mirror image.

To transfer the print, moisten a sponge or soft cloth with water, wipe the surface of the wood with it. Dry slightly remove moisture. The tree must be wet, but not wet, otherwise the pattern will float.

Place the printed picture on the tree. Do not move it as soon as the paper touches the surface.

Hold the drawing and gently press the wax paper over with a soft sponge or rag to print it.

Allow the pattern to dry for several hours, use furniture wax to protect the image. You can replace it with acrylic varnish.

Dry the wax or varnish layer for 24 hours, fasten the fasteners and hang them in the chosen place.

Pin
Send
Share
Send
Send